Pegboard Punching

Panel Processing has more capacity to produce pegboard panels than any other fabricator in North America. Our CNC controlled punch presses can produce clean and sharp pegboard holes with accurate margins on all four sides. Pegboard is produced from MDF and HDF (High Density Fiberboard).

Standard patterns offered are 1″ x 1″ OC, 1/2″ x 1/2″ OC, 1″ x 2″ OC, and 1″ x 3″ OC. Hole sizes are 9/32″ diameter (nominal 1/4″) and 3/16″ diameter (nominal 1/8″). Our CNC perforators also produce hole patterns with varying spaces between the rows of holes. Peg hole column spacing can be varied through removing punches in our perforating dies. Blank spaces for logos, graphics or design variations, creating a custom pegboard. Remember you are not limited to standard pegboard patterns with Panel Processing.

Large roll outs are no problem with multiple punch presses in our plants. No job is too large, or too small.

The equipment listed here is not available at every Panel Processing location. To learn more about what equipment and capabilities are available at each of our several locations, click the “Capabilities By Site” button below.

Equipment List

  • 80 Ton Perforating Press

  • 100 Ton Perforating Press

  • 150 Ton Perforating Press